Zero-Turn Radius Mowers

• CheckMate™ Striping Assemblies are designed to rest behind the rear drive tires.
  
  
• As the Zero Turn Mower pivots, the CheckMate™ system mirrors the pivoting action of the mower. Casters on the inside of the striping system will pivot with the inside rear drive tire; casters on the outside of the system will ‘arc’ with the outside drive tire.
  
  
• Simple hardware allows the system to connect to existing bolts or available bolt holes.

• CheckMate™ systems are designed to ride on the ground at all times utilizing the weight of the solid rubber casters. This weight, combined with the systems ability to constantly follow the contour of the lawn, allows for maximum ‘bend’ to be applied to the blades of grass.
  
  
• What Size? It is highly recommended that CheckMate™ systems mounted to ZTR's extend from the mid-point of the left drive tire to the mid-point of the right drive tire. Larger systems that extend beyond the drive tires require more caution when mowing around/near landscape walls or other solid architecture.
  
  
• For additional information on ZTR applications...click here
  
  

Commercial Walk-Behind Mowers

• CheckMate™ Striping Assemblies are designed to rest behind the rear drive tires.
  
  
• As the walk-behind pivots, the CheckMate™ system mirrors the pivoting action of the mower. Casters on the inside of the striping system will pivot with the inside rear drive tire; casters on the outside of the system will ‘arc’ with the outside drive tire.
  
  
• Simple hardware allows the system to connect to existing bolts or available bolt holes. 

• CheckMate™ systems are designed to ride on the ground at all times utilizing the weight of the solid rubber casters. This weight, combined with the systems ability to constantly follow the contour of the lawn, allows for maximum ‘bend’ to be applied to the blades of grass.
  
  
• What Size? Width is best defined by the operator, however, a system that closely matches the outside width of the drive tires is commonly preferred. Larger systems that extend beyond the drive tires require more caution when mowing around/near landscape walls or other solid architecture.

Lawn & Garden Tractors

• CheckMate™ Striping Assemblies are designed to rest behind the rear drive tires.
  
  
• As the tractor makes its turn, the CheckMate™ system mirrors the turning action of the mower. Casters on the inside of the striping system will turn with the inside rear drive tire; casters on the outside of the system will ‘arc’ with the outside drive tire.
  
  
• Simple hardware allows the system to connect to existing bolts or available bolt holes using the provided ‘L’ brackets.
  
  
• CheckMate™ systems are designed to ride on the ground at all times utilizing the weight of the solid rubber casters. This weight, combined with the systems ability to constantly follow the contour of the lawn, allows for maximum ‘bend’ to be applied to the blades of grass.
  
  
• What Size? Width is best defined by the operator, however, a system that measures approximately 4”-6” smaller than the mower deck is commonly preferred. Please note that larger systems that extend beyond the drive tires require more caution when mowing around/near landscape walls or other solid architecture.